|
|
|
|
||||||||
How Do You Evaluate a New Solder Paste?Board Talk
|
||||||||
TranscriptPhil Jim Bottom line is it's important that most everyone look at what's becoming available and be able to evaluate and qualify a new paste. Joe is such an expert in this field, so Joe expand on the importance and the general procedure for qualifying a new paste. JoeHere's my approach and my philosophy on qualifying a new solder paste. First, I know that changing solder paste is a very significant activity. Once you lock into a paste that works for you, and you feel comfortable with it, it's performing as you hope, it's giving you the yields you want. However, solder paste, as Jim mentioned, is advancing all the time. There's new solder paste coming to the market, so how do we periodically evaluate those new solder pastes? When I first started in the industry, what we would do is replicate all the laboratory tests that were done by the world-class suppliers and do all those tests over again in the lab. However, my philosophy now is buy into those test results. Believe in them because they're done by world-class, reputable organizations. What we focus on is the performance tests. I'll call those those the process tests. How will the new paste perform in your process? What about printability, shelf life, tack etc.. So my philosophy is to focus on those tests and not replicate all the tests that are done by the paste manufacturer lab. And the way to execute those tests is a formal design of experiments. Set up a brainstorming session, put together the right people, including the supplier, maybe a customer; whatever the right cast of folks is. Get in a room and we decide what characteristics in your process are critical for that paste to work for you. Look at things like tack time, shelf life, storage, solderability, so forth. And then do a design of experiments (DOE). There is one DOE that's been done many times for paste. It was actually developed by Cookson Electronics many years ago called a 27-board challenge. It allows you to test several parameters with a very small sample size. It's an economical and practical test. It's been in the industry for many years; used by many customers as a way to identify on the shop floor, in your process floor, what paste is going to give you the performance characteristics that you need. Phil I think the thing that Joe emphasizes is that these tests are done on the shop floor, in the environment that the solder paste will be subjected to and that's something that cannot be done generically. Jim We could go into infinite detail, but I think that's a really good, basic, very heartfelt endorsement and recommendation from Joe. Phil Well you have just wasted five minutes with Jim, Phil and Joe, the Assembly Brothers, who by day, go as ITM Consulting. Jim Whatever you do, don't solder like these guys. Phil Yeah, don't solder like these brothers. |
||||||||
Comments
|
||||||||
|
|
|
|
|