Electronics Assembly Knowledge, Vision & Wisdom
Ask the Experts
Solder Paste Mixing
How can we confirm that our centrifuge machine is properly mixing jars of solder paste to give us the results as per the standard requirement?
Ask the Experts

View the Expert comments below.
,{url:'http://www.circuitinsight.com/videos/experts_final.mp4'}], clip:{autoBuffering:true, autoPlay:true, scaling:'scale' } }).ipad();

Arranged via association with Circuitnet..
See the Expert Panel | Submit A Questions | Join the Panel
Ask the Experts Question
Ask the Experts
Solder Paste Mixing
How can we confirm that our centrifuge machine is properly mixing jars of solder paste to give us the results as per the standard requirement?
S.R.
Expert's Panel Responses
We have no recommended technique for verifying machine paste mixing as we do not recommend the use of paste mixing equipment.
image
Eric Bastow
Senior Technical Support Engineer
Indium Corporation
Eric is an SMTA-certified process engineer (CSMTPE) and has earned his Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College. He is also a certified IPC-A-600 and 610D Specialist. He has an associate's degree in Engineering Science from the State University of New York and has authored several technical papers and articles.

Mixing solder paste in a centrifuge can cause flux and other ingredients to separate from powder particles and is not recommended by many solder paste manufacturers.

Testing viscosity at multiple shear rates is the only method to confirm if the centrifugal mixing had an adverse effect on the paste.

image
Mitch Holtzer
Global Director of Customer Technical Support
Alpha Assembly Solutions
As the Global Director of Customer Technical Service (CTS) for Alpha, Mitch sets direction and provides coordination for the Alpha CTS group in a global capacity. A major focus of this position is to provide strategic support to OEM, CEM and Automotive customers and target accounts. Mitch joined Alpha in 1998 and has progressed through positions of increasing responsibilities in Marketing, Product Management and R&D. He is a graduate of Purdue University with a degree in Chemistry and holds an MBA from Temple University.
If the vendor's requirements for handling and storage of solder paste are followed mixing it with a plastic spatula should be enough to maintain its properties. Some solder paste manufacturers do not recommend the use of mechanical equipment. If you still prefer to use the centrifuge, the goal will be to obtain a nice smooth homogenous mixture without flux separation. A capability study on the mixer can determine if changes in paste's tack & viscosity have occurred.
image
Edithel Marietti
Senior Manufacturing Engineer
Northrop Grumman
Edithel is a chemical engineer with 20 year experience in manufacturing & process development for electronic contract manufacturers in US as well as some major OEM's. Involved in SMT, Reflow, Wave and other assembly operations entailing conformal coating and robotics.
The use of a mechanical (automated) mixing process is recommended to be done in conjunction with a viscometer to understand if the paste viscosity is within the values that the manufacturer recommends for optimal results.
image
Georgian Simion
Engineering and Operations Management
Independent Consultant
Georgian Simion is an independent consultant with 20+ years in electronics manufacturing engineering and operations.
Contact me at georgiansimion@yahoo.com.
We do not recommend using a centrifuge machine to mix solder paste. Unopened refrigerated paste should be allowed to reach room temperature, 19-25 degrees C (4 - 8 hours). Before putting on the stencil, manually stir the solder paste with a spatula for about one minute to ensure paste homogeneity and proper rolling.
image
David Bao
Director New Product Development
Metallic Resources, Inc
David Bao has more than fifteen years of experience in developing new solder paste, wave soldering fluxes and other SMT consumables. He currently serves as the Director of New Product Development at Metallic Resources Inc. He received a Ph.D. in Chemistry at Oklahoma State University.
Submit A Comment

Comments are reviewed prior to posting. Please avoid discussion of pricing or recommendations for specific products. You must include your full name to have your comments posted. We will not post your email address.

Your Name


Company


E-mail


Country


Comments


Authentication

Please type the number displayed into the box. If you receive an error, you may need to refresh the page and resubmit the information.



Related Programs
bullet Voiding/Drop Test for Mixed Alloy BGA Assembly
bullet Improved Flux Reliability of Lead-Free Solder Alloy Solder Paste
bullet Reusing recovered solder paste
bullet Predicting Fatigue of Solder Joints
bullet Viscosity of Solder Paste Before Printing
bullet Effect of Process Changes and Flux on Mid-Chip Solder Balling
bullet Study on Solder Joint Reliability of Fine Pitch CSP
bullet Solder Paste Viscosity
bullet Reliability of Lead-Free LGAs and BGAs
bullet Screening of Lower Melting Point Pb-Free Alloys
More Related Programs