Master Bond Inc.

Master Bond Inc. Logo
Master Bond Inc. is a leading manufacturer of adhesives, sealants, coatings, potting and encapsulation compounds. Meeting the exacting needs of the electronics industry, they offer an extensive product line of epoxies, silicones, light curing compounds, silicates, polysulfides and other polymer systems.

A wide range of performance properties can be regulated through each specific formulation. These include, but are not limited to physical strength, hardness, flexibility, high/low temperature resistance, viscosity, thermal conductivity, electrical conductivity, thermal conductivity and color. Resistance to moisture, chemicals, shock and vibration, as well as additional functions, such as dissipating heat, providing EMI/RFI shielding, supplying an electrically conductive pathway between substrates, or relieving stress between substrates can be engineered in the formulations. The outstanding performance and versatility of these compounds have proven to be a tremendous asset to the electronics industry.

From design to high speed production, Master Bond's packaging adheres to the strictest quality standards to assure consistent reproducible reliability.
154 Hobart Street
Hackensack, NJ 07601 USA

Using the Dam & Fill Method to Protect Components

Get an up close look at how the dam and fill process works to protect electronic components on a circuit board.
Press Releases
Technical Papers
Board Talk
Solder Paste Beyond The Shelf Life?
Issues With Fillets on Via Holes?
Can Tape Residue Contaminate a Clean Tank?
Suggested Stencil Wipe Frequency?
Reflow Oven Zone Separation Challenges
When To Use Adhesive To Bond SMT Components
How To Clean a Vintage Circuit Board Assembly?
PCBA Inspection Concerns
Ask the Experts
Lifted Lead on SOT Component
Allowable Bow and Twist on Round PC Fab
Mixed MSL Baking
Step Stencil Squeegee Angle
Solder Balling Splash After Reflow
Application Using No-Clean and Water Soluble Fluxes
IPC SOIC Defect Question
Mixed Process Solder Joint Appearance, Smooth or Grainy?